nuclear engineering

آموزش های تخصصی در حیطه ی مهندسی هسته ای

nuclear engineering

آموزش های تخصصی در حیطه ی مهندسی هسته ای

در رابطه با مبحث مهندسی هسته ای ، از این علم نوین برای تولید برق استفاده می شود. در واقع کم هزینه ترین و تمیزترین تکنولوژی در تولید برق که به صورتی بی انتها می توان ار آن استفاده نمود و تا چندین هزار سال مشکل تامین منابع مورد نیاز برای تولید سوخت آن وجود ندارد همین انزژی می باشد ولی با این خصوصیت که نیاز به یک تکنولوژی بسیار پیشرفته ایست که کمتر کشوری از آن برخوردار است. در این زمینه نیز اطلاعات مفیدی را قرار خواهیم داد...

And in connection with the subject of nuclear engineering, this new science is used to generate electricity. In fact, the cheapest and cleanest technology in electricity generation that can be used endlessly and for several thousand years there is no problem in providing the resources needed to produce fuel is the same energy, but with the feature that the need for a It is a very advanced technology that few countries have. In this regard, we will provide useful information ...

 

       انرژی که تحت عنوان انرژی هسته ای می شناسیم به واکنش هایی که در هسته ها و نوکلوئید های آن ها رخ می دهد اتلاق می شود. این انرژی یا بصورت شکافت هسته ای آزاد می شود یا بصورت همجوشی هسته ای.

 

       * در شکافت، یک عنصر سنگین به دو عنصر سبک تر تبدیل می شود و بنا بر رابطه ای که انیشتین آن را بدست آورد مقداری انرژی آزاد خواهد شد( درمقاله ای دیگر بصورت جزئی توضیح داده خواهد شد) این انرژی آزاد شده فوق العاده زیاد است و اگر بتوان آن را مدیریت نمود می توان در تولید برق استفاده ی بسیاری از آن کرد.

 

       ** در همجوشی هسته ای ، عملیات برعکس شکافت هسته ای رخ می دهد یعنی دو عنصر سبک به یک عنصر سنگین تر تبدیل می شوند(این مورد را هم درجای خود به طور مفصل توضیح می دهیم).

هم در شکافت و هم درهمجوشی مقداری از جرم پس از واکنش به انرژی تبدیل می شود و مقدار قابل ملاحظه ای خواهد بود. اگرچه همجوشی قبل از شکافت کشف شد و اولین واکنش همجوشی دست بشر در دهه ی 1920  آزمایش شد.

واکنش های همجوشی انواع مختلفی دارد که معروف ترین آن از ترکیب یک تریتیوم با یک دوتریوم بوده و حاصل یک عنصر هلیوم می باشد.

 

         *** واکنش های شیمیایی در مقایسه با واکنش های هسته ای  انرژی بسیار کمتری آزاد می کنند به عنوان مثال یک اتم کربن با دو اتم اکسیژن ترکیب شده و  CO را بوجود می آورند. در واقع با تغییرات الکترون های مداری این اتم ها انرژی واکنش های  شیمیایی آزاد می شود.

 

       **** پرتو های رادیو اکتیو هم مقداری انرژی تولید می کنند  که در مقابل شکافت ناچیز و قابل صرف نظر کردن است. البته این پرتو ها کاربردهای بسیار زیادی در صنعت و پزشکی دارند که در کاربرد پرتو ها بررسی می شوند. مقدار انرژی تولید شده از این 4 واکنش در جدول زیر نشان داده شده است.

 

انرژی تولید شده

در هر واکنش

نوع واکنش

 3-4 Mev

شیمیایی

3-18 Mev

همجوشی

200 Mev

شکافت

1-5 Mev

رادیو اکتیویتی

 

    Energy known as nuclear energy refers to the reactions that take place in nuclei and their nucleoli. This energy is released either as nuclear fission or as nuclear fusion.

    * In fission, a heavy element is converted into two lighter elements, and according to the relation that Einstein obtained, some energy will be released (which will be explained in detail in another article). This released energy is extremely high. And if it can be managed, it can be used a lot in electricity generation.


    ** In nuclear fusion, the reverse operation of nuclear fission occurs, ie two light elements become a heavier element (we will explain this in detail in its place).
In both fission and fusion, some of the mass is converted to energy after the reaction, and will be significant. However, fusion was discovered before fission, and the first human hand fusion reaction was tested in the 1920s.
There are different types of fusion reactions, the most famous of which is the combination of a tritium with a deuterium and is the result of a helium element.


    *** Chemical reactions release much less energy than nuclear reactions, for example, a carbon atom combines with two oxygen atoms to form CO2. In fact, by changing the orbital electrons of these atoms, the energy of chemical reactions is released.


    **** Radioactive beams also produce some energy that is negligible and negligible in the face of fission. Of course, these beams have many applications in industry and medicine that are studied in the application of beams. The amount of energy generated from these 4 reactions is shown in the table below.

     

Energy produced
In each reaction

Type of reaction

 3-4 Mev

Chemical

3-18 Mev

Fusion

200 Mev

fission

1-5 Mev

Radioactivity

 

 

refrences: nuclear energy conversion_ M.M.El_Wakil  and some other refrences

 

موافقین ۰ مخالفین ۰ ۰۱/۰۲/۰۲
hrm nuclearengineering

نظرات  (۰)

هیچ نظری هنوز ثبت نشده است

ارسال نظر

ارسال نظر آزاد است، اما اگر قبلا در بیان ثبت نام کرده اید می توانید ابتدا وارد شوید.
شما میتوانید از این تگهای html استفاده کنید:
<b> یا <strong>، <em> یا <i>، <u>، <strike> یا <s>، <sup>، <sub>، <blockquote>، <code>، <pre>، <hr>، <br>، <p>، <a href="" title="">، <span style="">، <div align="">
تجدید کد امنیتی